Showing posts with label coldwork. Show all posts
Showing posts with label coldwork. Show all posts

Tuesday, February 24, 2009

Coldworking and Fire Polishing

I'm getting closer to finishing this piece. Tonight I got back to the coldwork needed to finish the edge of the blue bowl. I ordered a couple of additional wet belts for my sander in various grits to help with the coldworking and those belts arrived last week.

Tonight I was able to go through a series of belts, from a 60 grit to 800 grit, and get the edge finished. I did a slight bevel on the top and bottom edge which should smooth even more during the fire polish.

The reason for fire polishing is to help round the glass edge a little more, smooth it and make it nice and glossy.

The finishing work went smoothly and much easier than my previous attempts. I think I'm becoming a coldworking believer. In the Kent Lauer, Faceted Dichroic Pendant class, Kent told me it wouldn't take much time at all to develop coldworking skills. Of course, being the Master Beveler that he is, he was right!

Tonight I'm completing the fire polish stage, so the edge will no longer have a mat appearance and should be glossy. I hope I'm happy with the results when I open the kiln tomorrow to check it.

After that, I will be ready to complete the final stage for this piece, the slumping into the bowl mold to complete the project. I learned a lot from this bowl and that seems to be the norm with any project I work on.

I will move on to the Hues of Nature piece next for the finishing work it needs.

During all of this, I've been revamping our studio website, along with my personal website. All this and a day job too! Art has captured my soul and I don't think I could live without being creative. Here's wishing all of you inspirations for your work too!

Sunday, February 15, 2009

The Continued Evolution

The blue bowl continues to evolve. I'm happy with the results. I like the addition of the rust colored stringers...they compliment the copper mesh inclusions.

The offending chip has disappeared and the edges are nice too. Now I will start the coldworking process again. I'll have to see how things look when I'm done coldworking the edge; at that point I'll have to decide if I want to do a fire polish. Once all of that is done, then it can be slumped into the bowl mold and then it should be done!

I'm thinking about calling this 'A Crazy Blue World'....or something like that. :)

Thursday, February 12, 2009

Evolution of the Blue Bowl

You may recall that in my last post about the blue bowl, I stopped working on it as I was getting tired and started to make mistakes. One of the things that happened was the bowl slipped from my rubber gloves and hit the edge of the sink. A small chip occurred and I thought with the right amount of coldworking, I could eliminated it. Well, sadly the chip went too far into the surface and I don't want to cut down the diameter of the bowl that far. So I've decided to take another approach and the bowl is evolving.


The top picture shows my latest idea. I'm going to take some of the curled stringers I made this past weekend and add them to the surface of the bowl. I like the contrast of the straight lines and these curly stringers. This is just my initial pass tonight and I want to search through the stringers I created to find the best ones suited for what I want to do next. I believe that fusing this piece again will eliminate the chip and provide a nice surface. Of course, this means that I will have to create another dam for the fusing process, to hold the glass at the 3/8" thickness it has now. I'll take a pre-fuse picture to show how this will work. And I will lose all of the coldworking efforts I have put into this piece, but I think that is ok because I should be able to salvage the piece and the accident may cause this to turn into a much more interesting end product! I hope.

I tried to take a picture of the offending chip. It doesn't show up very well, but the yellow arrow is pointing to it. It's an imperfection that is just unacceptable and I will hope my attempt at fusing again will remedy it.




I also took a picture of the edge after I had completed some of the coldworking. It's much smoother, and has started to take on a nice mat finish. I will still have to redo this after the fuse, but that's ok too. I had planned on a fire polish to shine things up after the coldworking anyway.

So, as all of us have done, we learn from our mistakes and can sometimes turn them into something better. I certainly hope that will be the case for this blue bowl. I'm becoming rather fond of it. The more I look at it, I'm reminded of a beautiful blue planet with swirling clouds.

Monday, February 9, 2009

Blue Bowl - Progress

These are pictures I took in the various stages of the finish work I'm doing for the blue bowl. I'm still working on it, but thought I would post some of what I've completed so far.

The first picture shows the glass 'icicles' that formed during the fusing process. I used a steel ring to act as a dam so the glass would remain at its depth of 3/8". Glass is like water, it likes to seek it's level and when fusing..... glass wants to find a thickness of 1/4", so when I want to make a piece thicker, I have to use a dam to contain/stop it from spreading. All these glass peaks are pretty sharp and nasty....they needed to be ground off before I could start using the wet belt sander to finish the edge. I used my trusty Glastar grinder and eliminated all of them. The glass peaks could tear up a sander belt and eliminating them makes it much safer to handle the piece too!

Next I used a circle template, 10" in diameter. I placed the template underneath the glass and using my light table, I can see the circle I want to have for my finished piece. There are yellow arrows pointing to the black line I drew with the aid of the template. I used a Sharpie and covered the line with paste wax so it would stay intact while I used my glass saw to cut the circle shape.



This is me with my kevlar glove, using my Taurus III ring saw to cut the finished circle shape. Love my saw. I really enjoy the benefits of all the tools I use to create glass work.









This is the completed circle after the saw work was done.











And below is the edge left after cutting the circle. Now I am in the process of using my wet belt sander to create a nice mat finish, which will eliminate the whitish film on the edge that you see in this photo. I don't have a high end coldworking machine yet, but I will get the job done. And I will probably do a fire polish on this piece when I'm done with the coldworking so it will have a nice, reflective sheen. If I had the more advanced machine, I would be able to polish the surface without needing a fire polish.





So, I reached a point tonight where I was starting to make mistakes and I knew it was time to quit. I think I'm still tired from all the things I did this weekend, along with a full day at the regular office job. Once I'm done with the coldworking phase, I'll report back and post another picture.

Happy creating everyone!

Monday, February 2, 2009

Results - Bowl after 1st fuse

Fresh from the kiln, and after it cooled to room temperature, I took this picture of the bowl blank. I had a few 'surprises' and I'm happy to report I'm pleased with all of them.

The copper mesh remained copper color; I used clear glass to cap all but one. A few surprise elements are the red striker strips, which I think create an interesting balance/effect.

And I am very happy to see how well rounded everything turned out. I'll take it out of the steel ring and begin the coldwork phase. That can be time consuming, the rough edges need to be ground down and then the staged polishing of the outer edge. Once that is done, I can slump it in the bowl mold for the finished product.

I like the contrasts here and find the blue glass rich with color. Not sure what I'll call this one yet...may wait until it is complete.